Πώς να επιδιορθώσετε το σφάλμα εκκίνησης 0xc000000f

Έχουμε γράψει αρκετές λύσεις για την επίλυση σφαλμάτων στο λειτουργικό σύστημα Windows. Τα Windows λαμβάνουν πολλά λάθη τη στιγμή που αρχίζει να γερνά. Επομένως, αυτά τα σφάλματα πρέπει να διορθωθούν αναλόγως. Ένα από τα πιο πειράγματα λάθη που υπάρχουν σε παλιές εκδόσεις των Windows, συμπεριλαμβανομένων των Windows XP, καθώς και σε νέες εκδόσεις, συμπεριλαμβανομένων των Windows 8, είναι το σφάλμα 0xc000000f .

Αυτό το σφάλμα σχετίζεται με τη Διαχείριση εκκίνησης των Windows και όποτε τα Windows προσπαθούν να διαβάσουν τα δεδομένα διαμόρφωσης εκκίνησης , εμφανίζει αυτό το μήνυμα σφάλματος που επιμένει στους χρήστες να επιδιορθώσουν τους υπολογιστές τους μέσω του Windows Installation Media

0xc000000f

Η επανεκκίνηση του υπολογιστή μετά από αυτό το μήνυμα σφάλματος δεν κάνει τη δουλειά και αυτό ενοχλεί τους χρήστες.

Λόγοι πίσω από αυτό το σφάλμα 0xc000000f:

Ο τομέας εκκίνησης είναι σημαντικός για τη φόρτωση των Windows στη μνήμη για σκοπούς εκτέλεσης. Έτσι, εάν ο τομέας εκκίνησης καταστραφεί για κάποιο λόγο, αυτό το σφάλμα θα αντισταθεί στη φόρτωση των Windows. Η άλλη αιτία αυτού του σφάλματος μπορεί να είναι η αποτυχία του σκληρού δίσκου . Εάν ο σκληρός δίσκος έχει κακό τομέα ή κακόβουλο λογισμικό, τότε θα έκανε επίσης το ίδιο εμποδίζοντας τη φόρτωση των Windows.

Λύσεις για την επίλυση σφάλματος 0xc000000f:

Υπάρχουν πολλές λύσεις για την επίλυση αυτού του ζητήματος. Αυτές οι λύσεις σίγουρα θα σας επιτρέψουν να επιστρέψετε στα Windows σας χωρίς να χάσετε σημαντικά δεδομένα.

Μέθοδος 1: Επιδιόρθωση του υπολογιστή σας

Υπάρχει ένα ρητό, «Κάνε ό, τι σου ζητάει το αφεντικό σου». Το ίδιο ισχύει εδώ. Με κάθε σφάλμα στα Windows, η Microsoft παρέχει μερικές αρχικές συμβουλές για την ανάκτησή του.

Για να το κάνετε αυτό, πρέπει να έχετε ένα γνήσιο DVD / USB με δυνατότητα εκκίνησης των Windows. Εάν δεν το έχετε, ακολουθήστε αυτές τις δημοσιεύσεις για να δημιουργήσετε το εκκινήσιμο μέσο.

  • Windows 7 / Windows 8: //appuals.com/create-windows-bootable-usb-or-dvd/
  • Windows 10: //appuals.com/create-windows-10-bootable-usb-with-rufus/

Μετά τη δημιουργία του εκκινήσιμου DVD / USB, θα πρέπει να επιλέξουμε τη σωστή συσκευή εκκίνησης, για αυτό, μεταβείτε στο BIOS του συστήματός σας πατώντας F2 (διαφέρει από σύστημα σε σύστημα) και επιλέξτε Boot Order . Φέρτε το DVD / USB σας ως πρώτη συσκευή εκκίνησης .

0xc000000f-1

Αποθηκεύστε τις αλλαγές στις ρυθμίσεις και επανεκκινήστε τον υπολογιστή σας ξανά. Τώρα, θα εκκινήσει χρησιμοποιώντας τα εκκινήσιμα μέσα σας και θα αρχίσει να επιδιορθώνει αυτόματα τα Windows σας.

Μέθοδος 2: Χρήση του εργαλείου bootrec.exe

 Για να διορθώσετε αυτό το μήνυμα σφάλματος, μπορείτε να χρησιμοποιήσετε το εργαλείο bootrec.exe το οποίο είναι ενσωματωμένο στα Windows. Αυτή η μέθοδος απαιτεί επίσης ένα DVD / USB εγκατάστασης των Windows με δυνατότητα εκκίνησης. Ο κύριος σκοπός της χρήσης αυτού του εργαλείου είναι η αναδημιουργία των δεδομένων διαμόρφωσης εκκίνησης (BCD) που ελέγχουν τον τρόπο εκκίνησης των Windows.

Έτσι, για να αποκτήσετε πρόσβαση στο εργαλείο bootrec.exe, ακολουθήστε τις παρακάτω οδηγίες.

1. Επανεκκινήστε τον υπολογιστή σας και χρησιμοποιήστε το DVD / USB με δυνατότητα εκκίνησης για εκκίνηση.

2. Εάν σας ζητηθεί το κλειδί, πατήστε οποιοδήποτε κουμπί στο πληκτρολόγιο.

3. Επιλέξτε τη γλώσσα, την ώρα, το νόμισμα και το πληκτρολόγιο και πατήστε Επόμενο .

4. Επιλέξτε το λειτουργικό σύστημα που θέλετε να επιδιορθώσετε και κάντε κλικ στο Επόμενο

5. Τώρα, μέσα στις Επιλογές ανάκτησης συστήματος , επιλέξτε τη γραμμή εντολών .

6. Θα εμφανιστεί μια μαύρη οθόνη με έναν δρομέα που αναβοσβήνει. Πληκτρολογήστε bootrec.exe μέσα στη γραμμή εντολών και πατήστε το πλήκτρο Enter στο πληκτρολόγιο. Θα ξεκινήσει η ανοικοδόμηση του BCD και ο υπολογιστής σας θα επιστρέψει στην κανονική του κατάσταση.

0xc000000f-2

Για κάποιο λόγο, εάν η ανακατασκευή του BCD δεν λειτουργεί, θα πρέπει να διαγράψετε το προηγούμενο BCD και να το δημιουργήσετε ξανά για να έχετε ένα ολοκαίνουργιο Data Configuration Data. Για το σκοπό αυτό, πρέπει να πληκτρολογήσετε τις ακόλουθες εντολές στη γραμμή εντολών. Πατήστε Enter μετά από κάθε γραμμή κώδικα.

bootrec / fixmbr bcdedit / export C: \ BCD_Backup c: cd boot attrib bcd –s –h –r ren c: \ boot \ bcd bcd. παλιό bootrec / RebuildBcd

Μέθοδος 3: Επιδιόρθωση BCD

Σε αυτήν τη λύση, θα καταργήσουμε την εμφάνιση του αρχείου BCD και του γονικού διαμερίσματός του, έτσι ώστε να μπορούμε να το επιδιορθώσουμε ή να δημιουργήσουμε ένα νέο αρχείο BCD από την αρχή.

  1. Κατ 'αρχάς, θα χρειαστείτε ένα Windows 8 ή 10 εγκατάσταση πολυμέσων που βρίσκεται σε ένα USB διαμορφωμένη με ένα αρχείων FAT32 σύστημα . Ένα σύστημα που βασίζεται σε UEFI, καθώς το δικό σας δεν θα αναγνωρίζει ένα μορφοποιημένο USB NTFS ως συσκευή με δυνατότητα εκκίνησης.
  2. Για να δημιουργήσετε ένα μέσο εγκατάστασης των Windows 8, θα πρέπει να έχετε μια μονάδα USB τουλάχιστον 4 GB , εντελώς άδεια. Τώρα κατεβάστε το Εργαλείο δημιουργίας μέσων Windows 8 από αυτόν τον σύνδεσμο.
  3. Run the Downloaded file and Click Yes if the UAC warning message appears. Select any Edition, Language, and Architecture as you will not be actually installing Windows. Now Click Next.
  4. Select your USB drive and click Next. Make sure your USB is connected with the Computer.
  5. Wait for the process to complete and follow the on-screen instructions.
  6. Once you have your installation media ready, Connect the USB to the faulty computer.
  7.  Now PowerOn that computer and start tapping the appropriate key to Boot from another device. The key may vary according to your computer manufacturer and model.
  8. Still, if you cannot boot from the USB then make sure the CSM and Secure Boot features are Disabled in your BIOS settings.
  9. When you are in the Boot device selection screen, Select your USB.
  10. Once you are on the installation screen, Press and Hold the Shift key and pressF10 to bring up a black window called Command Prompt.
  11. In it, type
    diskpart

    press Enter .

  12. Now type list disk and press Enter to list all storage disks attached to your computer.
  13. Now type
    sel disk 0

    press Enter to select your disk with Windows 8 in it.

  14. Type list vol and press Enter to list all volumes
  15. Now you have to Recognize 2 volumes here, the EFI volume and the volume on which your Windows is installed.
  16. Your EFI volume will have FAT32 written in the Fs column. Its size would be 100 MB and will have System written under Info. Also, it may have BOOTSTRAP written in the Labelcolumn. This is how you will recognize your EFI volume. Note its Volume number. If you cannot find your EFI volume, move on to the next solution.
  17. Your Windows partition will probably have the C in the Ltr column and there will be Boot written in the Infocolumn. Note its Ltr down.
  18. Firstly we will assign a letter to the EFI volume. To do so, Type select Volume 1 and Press Enter (Assuming Volume 1 is your EFI volume).
  19. Now type
    assign letter P

    Press Enter (Assuming that the letter K is not in use).

  20. Type exit and press Enter.
  21. Now type
    cd /d P:\efi\microsoft\boot\ 

    and Press Enter.

  22. Type
    bootrec /fixboot

    Press Enter and a new boot sector will be created.

  23. Now, Type ren BCD BCD.bak to render old BCD file useless as it maybe corrupt, now allowing us to create a new BCD file.
  24. Now Type
    bcdboot C:\Windows /l en-us /s k: /f ALL 

    Press Enter (Assuming C is the drive Ltr for the volume on which your Windows is installed).

Now Close the blackwindow and Restart your computer. It should boot fine now. If not, move on to the next solution.

Method 4: Create an EFI Partition

If for some reason your EFI partition is missing, you can create a new one easily. All you need is a Windows installation media and 200 MBs of free space on your disk.

To do so follow the method in the above solution to make a Windows installation media and boot from a USB and then reach the black Command Prompt window.

  1. In the black window, Type Diskpart and press Enter.
  2. Now type list disk and press Enter.
  3. Type select disk 0 and press Enter to select the disk in which you want to create a new EFI partition.
  4. Now Type list partition and press Enter to list all partitions.
  5. Type Select Partition 1 and Press Enter assuming that the selected partition will have 200 MBs or more free space.
  6. Now type
    shrink desired=200 minimum=200 

    press Enter.

  7. Type
    create partition efi

    press Enter.

  8. Again now, type
    list partition

    press Enter.

  9. Type select partition 2 and Press Enter assuming that the newly created 200 MB partition is partition 2.
  10. Now type
    format fs=fat32

    press Enter.

  11. Type list vol and press Enter to list all volumes. Note down the volume of the newly created partition of 200 MB size.
  12. Type Select vol 3 and Press Enter assuming that the volume number of the EFI partition you previously noted is 3.
  13. Type assign and press Enter.
  14. Again Type list vol and press Enter to see which Letter (ltr) is assigned to the 200 MB EFI partition. Note the drive letter down.
  15. Also, you will have to recognize and note down the drive letter (ltr) of the volume that contains your Windows partition. You can recognize it by looking for Boot in the Info column. In most cases, it’s the drive letter C. Note it down.
  16. Now type
    bcdboot C:\Windows /l en-gb /s B: /f ALL

    and press Enter. Assuming that your Windows drive letter is C and B is the drive letter that was assigned to your EFI partition.

  17. Now restart your system. Your problem should be gone now.

Method 5: Changing Disk ID

In certain cases, the disk ID might be configured improperly due to which this issue is triggered and the user is prevented from being able to boot into their computer. Therefore, in this step, we will be changing this Disk ID and then check to see if the issue still persists. In order to do that:

  1. Follow the above methods to create a bootable USB and set it as the first priority in the boot menu and then use it to boot into the command prompt window as indicated above.
  2. In the command prompt, type in the following commands one by one and press “enter” after each one of them.
     diskpart list disk select disk 0 select disk 1 list partition select part 0 select part 1 active detail part 0 detail part 1
  3. In the very last command, “Detail Part1” you should see a very long ID number. It might be shown in the second last command in some cases, i.e, “Detail Part 0”.
  4. Copy this ID number and there should be an alphabet at its end instead of a number. For example, “1231432523524b”.
  5. We will be changing this last alphabet to 0 to make the ID number consist of numbers only.
  6. To do that, type in the following command and replace the alphabet in the end with the number “0”.

    set ID=(Hardware ID number after replacing it with “0” at the end)

    For example, “Set ID=12314325235240” using the example given in the 4th step.

  7. Check to see if the issue still persists.

Έτσι, στο τέλος, θα έχετε τον υπολογιστή σας πίσω στα χέρια σας, καθώς όλα τα ζητήματα που σχετίζονται με το σφάλμα 0xc000000f θα επιλυθούν. Εάν εξακολουθεί να υφίσταται, δοκιμάστε να χρησιμοποιήσετε την επιδιόρθωση εκκίνησης για να διορθώσετε τα προβλήματα εκκίνησης και να δείτε αν αυτό βοηθά.